Pile Group Analysis, Laterally Loaded Piles, P-Y Curves and Rock Socket.

This blog highlights how PileAXL software simplifies the design of axially loaded piles by supporting multiple Eurocode 7 standards.

PileAXL is a software developed by Innovative Geotechnics for analyzing single piles under axial loading. PileAXL 2.5.1 version release.

Settlement prediction of single piles under axial loading is as important as the estimation of ultimate axial capacity which is the sum of u

Rowe and Armitage method is one of the main methods for the design of rock socketed piles. This method uses a series of numerical solutions

Axial capacity of piles (Q) in the PileAXL program consists of shaft resistance (Qs) along the pile shaft and end bearing resistance (Qb)...

This blog presents a design example for a 1.2 m diameter reinforced concrete bored pile installed through interbedded clay and sand layers

In this blog, we explore the capabilities of PileAXL program in analyzing the axial capacity and settlement of piles.

This blog presents a case study for an example from "ICP Design Methods for Driven Piles in Sands and Clays” by Jardine et al. (2005)

APT T-Z Curves for clay and sand are included in the PileAXL program for pile settlement analysis.

PileAXL is a program for single piles under axial loading (compression or tension) for both onshore and offshore foundations.